16mm blue double-layer PC solar panel

The transparent pc endurance board needs to be pre drilled with a hole diameter of 1.5 times the screw diameter when installing and fixing screws. Tight screws can cause stress. Reserve space and pay attention to embedding depth. The expansion value of transparent Pc Endurance Board is equal to the linear expansion coefficient x length x maximum temperature change value (the linear expansion coefficient of PC board is 7 x 10-5mm/mm/℃). Neutral glass adhesive and suitable cushioning materials should be used, and PVC materials should not be used. Transparent PC endurance boards require the use of electric tools (tungsten carbide saw blades) during cutting; When carrying the body, the board must be fixed to avoid vibration; Do not tear off the protective film during cutting. If it is necessary to mark lines before cutting, try to mark them on the protective film as much as possible. If it is necessary to mark directly on the board, please use crayons and avoid using sharp tools for marking. The transparent PC endurance board can only remove the protective film after installation is completed.